Pet O Tel
Project: CR Ranch Pet-O-Tel Modesto CA
Contractor: Phoenix Coatings, Inc. Madera CA
Suppliers:
Vaprecision, Costa Mesa CA
Material: Anhydrous Calcium Chloride Concrete
Moisture Vapor Emission Test Kit
International Chem-Crete Corp., Richardson TX
Material: Sofix CCC 700 crystalline moisture blocker
General Coatings, Fresno CA
Material: Ultra-Tuff 2800 Polyurea
Ultra-Shield 3000 Aliphatic Urethane
Chips Unlimited, Inc., Tempe, AZ
Material: ¼” Solid color plastic chips
Sherwin Williams, Cleveand OH
Material: MACROPOXY 646 Fast cure epoxy
All cracks are routed out and filled with epoxy grout (left) and the floor is shot blasted over large play area (right).
The floor is shot blasted over individual kennels (left). All sharp corners are sanded prior to the application of the Polyurea Base Coat (right).
Polyurea first Base Coat is applied to the kennal walls (left) and Polyurea Base Coat is applied prior to spatter coat (right).
Polyurea Base Coat is applied prior to spatter coat (left). Polyurea film thickness is checked by the applicator to make sure specification is met (right).
Polyurea spatter coat on steel post (left). Polyurea is tested for adhesion to the concrete floor (right).
Polyurea second base coat is applied to the floor and walls (left). Aliphatic Urethane Top Coat is applied to the wainscot and floor of the kennels and main room (right).
Decorative flakes are broadcast into the wet Polyurethane Top Coat (left). Finished kennel (right).
Coming in April, pictures of the completed Pet o Tel.
